Eclectic Motorworks, LLC, Holland, Michigan

Eclectic Motorworks, LLC
445 West 22nd Street
Holland, MI 49423
616.355.2850
carlheideman@yahoo.com

home page

background

services & expertise

events & training

shop tour

MGA Parts For Sale

We manufacture several parts for the MGA that are either unavailable elsewhere or available but fit poorly. We also sell entire MGA frames in either bare metal or powdercoated and ready for assembly!

To order parts, please call the shop at 616.355.2850 between 9am and 5:30pm Monday thru Friday or email eclecticalan@yahoo.com

We accept checks and money orders only, no credit cards. Eclectic Motorworks ships via UPS ground and can not ship to PO boxes.

Parts Pricing
(does not including shipping or tax, if applicable):

MGA Coupe Door Striker Tapping Plate (2 required). Not available anywhere else!	$9.95 each
MGA 1500 Brake Tab (2 required)	$5.95 each
MGA 1600 Brake Tab (2 required)	$5.95 each
Bumper Mount Stud	$9.95
Bumper Support Bracket	$49.95
MGA Battery Frame Base Assembly - Standard.	$49.95 each
MGA Battery Frame Base Assembly - Long.	$49.95 each
MGA Battery Frame Support Arms - One set per base assembly.	42.95 per set
MGA Knee Panel, Full Piece	$44.95 each
MGA Knee Panel, half piece	$19.95 each
MGA Boot/Bonnet Hinge Shim	$1.25 each
MGA Crank Guide - front frame extension	$14.95
MGA Swaybar Bracket (Original)	$29.95 each
MGA Swaybar Bracket (Reproduction)	$16.95 each
MGA Swaybar Bushing	$6.95 each

Complete MGA Frame

Repaired MGA 1500 Frame - bare metal. Local pick-up only. 1 in stock (please contact us for information on freight shipping of MGA frames)	$3250.00
Convert stock frame from 1500 to 1600 or 1600 to 1500.	$70.00
Powdercoat frame	$500.00

2 MGA 1500 frames in stock now!

MGA frames are local-pickup only. Transportation of frames and cores are the responsibility of the purchaser. All frames require a $500 core deposit to be refunded when Eclectic Motorworks receives a repairable core in exchange.

MGA Coupe - Door Striker Tapping Plate

MGA 1500 Brake Tabs

MGA 1600 Brake Tabs

Bumper Mount Stud -

Bumper Support Bracket with Stud - Bolts to outside of extension tube. Specify left or right.

MGA Battery Frame Base Assembly (standard) - A must for 100% correct restorations, this box is meant for an original-type 6 volt battery.

MGA Battery Frame Base Assembly (long) - This box looks correct, but is 1 inch longer than original to accomodate 12 volt batteries.

MGA Battery Frame Support Arms - Each set supports one base assembly.

MGA Knee Panel - full piece - This piece fills the gap between frame and body near the occupant's knee. Specify left-hand or right-hand

MGA Knee Panel - half piece - The lower half of the full panel for repairing less-damaged original parts. Specify left-hand or right-hand.

MGA Boot/Bonnet hinge shim - If your hinges prove difficult to fit correctly, these shims may help. These shims also work in MGB Boot hinges.

MGA Front Frame Extension Crank Guide

MGA Swaybar Bracket (Original) - These brackets are from England and are 100% original for accurate restorations. Two required.

MGA Swaybar Bracket (Reproduction) - These brackets are not as accurate as the brackets listed above, but they fit fine and are much less expensive. Two required.

MGA Swaybar Bushing - Two required.