For earlier pictures from this project, please visit our previous work page from our old website!
Exhaust system modifications
The last time we built a Miata-powered MGB we used a mild steel ANSA exhaust system mated to a Miata downpipe. The owner of this GT liked the sound so much that he chose the same system. Unfortunately for us, ANSA (previously know by the brand name Monza) had again...
Electrical spaghetti
One of the biggest jobs on this project is the wiring. We attempted to maintain as much of the stock MGB/GT wiring as possible, while using only the wiring necessary from the engine management systems of the Miata to operate the engine functions. We started with a new...
Beginning the reassembly
We installed a new Moss Tourist Trophy fuel tank and reinstalled all of the underbody fuel feed and return lines. The clutch master cylinder (stock Mazda Miata) was reinstalled in the pedal box, and the brake master cylinder and booster from a later MGB was re-fit....
1967 MGB/GT back from paint
Final bodywork, prep and paint took place down the street at our partner shop, Kimber Auto Body. They set the final gaps on the doors, hood, and hatch, smoothed out the last few remaining ripples, and then primed and painted the car. The color chosen is an Aston...